The small and efficient AV132 has a performance of 30,000 cph. Due to the stand-out features the AV132 is a high-speed axial THT-insertion machine.
Supplied with a 40 or 80 component feeder with optional jumper wire, the compact supply unit configuration of the AV132 can fit both ammo pack and reel. The dual partition configuration enables a fast changeover. The next job can be set up while the current one is being processed.
Capable of inserting components in four directions: 0°, 90°, 180°, and 270°, the AV132 optimizes productivity by simultaneously handling 26 and 52mm taped components and providing fast, full auto-recovery.
The AV132 can reduce loading times by running two PCBs simultaneously, enabling efficient production due to a speed of 0.12s/component and a transfer speed of 2s/PCB.
The fixed feeder unit and the out-of-component detection feature allow to replenish components while maintaining long-term non-stop runs.
Preparation in advance or equipment operation during component change-over is possible.
|PCB dimensions (mm)||L 50 x W 50 to L 508 x W 381|
|Max. speed *1||0.12 s/component|
|No.of component inputs||40 + 40 + JW (JW is optional)||40 + JW (JW is optional)|
|Applicable components||Resistors1/8 W,1/6 W,1/4 W,1/2 W, Jumper wire (tin-plated wire), Diodes, Cylindrical ceramic capacitor|
|PCB exchange time||about 2.0 s|
|Insertion direction||4 directions (0 °, 90 °, 180 °, 270 °)|
|Electric source *2||3-phase AC 200 V, 3.5 kVA|
|Pneumatic source||0.5 MPa, 200 L/min (A.N.R.)|
|Dimensions (mm)||W 3 106 x D 2 300 x H 1 575 mm *3||W 2 104 x D 2 300 x H 1 575 *3
|Mass||2 648 kg||2 228 kg|
- On condition
- Compatible with 3-phase 220 / 380 / 400 / 420 / 480 V
- Excluding signal tower
- Only for main body
* Values such as maximum speed may vary depending on operating conditions.
* Please refer to the “Specification” booklet for details.